德國進口真空(壓力)球閥是適用于真空（是指工作壓力低于標準大氣壓的，形成一定真空的氣體）系統中接通或切斷管路的介質流。該閥為直通式手動球閥，靠球面密封，因而既能用在真空狀態下，也能在低壓狀態下使用，并可任意位置安裝。 適用的工作介質真空氣體。應用于真空、乳制品、酒業、生物工程、食品、制藥、飲料、化妝品及化工領域。

Germany imported vacuum (pressure) is applied to the vacuum valve (refer to the working pressure is lower than the standard atmospheric pressure, a certain vacuum gas) system is turned on or off medium flow pipeline. The manual ball valve for straight-through, by spherical seal, which can not only be used in a vacuum, can be used at low pressure, and can be installed anywhere. Suitable working medium vacuum gas. Vacuum is applied, dairy products, wine, biological engineering, food, pharmaceutical, beverages, cosmetics and chemical industries.

進口真空球閥連接形式：

法蘭連接可分為以下幾種：

1）光滑式：用于壓力不高的閥門。加工比較方便

2）凹凸式：工作壓力較高，可使用中硬墊圈

3）榫槽式：可用塑性變形較大的墊圈，在腐蝕性介質中使用較廣泛，密封效果較好。

4）梯形槽式：用橢圓形金屬環作墊圈，使用于工作壓力≥64公斤/平方厘米的閥門，或高溫閥門。

5）透鏡式：墊圈是透鏡形狀，用金屬制作。用于工作壓力≥100公斤/平方厘米的高壓閥門，或高溫閥門。

6）O形圈式：這是一種較新的法蘭連接形式，它是隨著各種橡膠O形圈的出現，而發展起來的，它在密封效果上比一般平墊圈可靠。

Imported vacuum valve connection:

Flange connections can be divided into the following categories:

1) Smooth formula: valves for pressure is not high. Processing more convenient

2) lenticular: higher working pressure, can be used in hard washer

3) tenon slot: Available plastic deformation larger washers, use in corrosive media is more extensive and better seal.

4) trapezoidal trough: oval metal ring, gasket, the use of working pressure ≥64 kg / cm of the valve, or high temperature valves.

5) Lens type: washer lens shape, made of metal. For working pressure ≥100 kg / cm high pressure valves, or high temperature valves.

6) O-ring style: This is a relatively new form of flange connection, it is with the emergence of a variety of rubber O-ring, and developed, it is generally flat washers reliable sealing effect on the ratio.

螺紋連接又可分為以下幾種：

這是一種簡便的連接方法，常用于小閥門。又分兩種情況：

1）直接密封：內外螺紋直接起密封作用。為了確保連接處不漏，往往用鉛油、線麻和聚四氟乙烯生料帶填充；其中聚四氟乙烯生料帶，使用日見廣泛；這種材料耐腐蝕性能很好，密封效果極佳，使用和保存方便，拆卸時，可以完整地將其取下，因?yàn)樗且粚訜o(wú)粘性的薄膜，比鉛油、線麻優越得多。

2）間接密封：螺紋旋緊的力量，傳遞給兩平面間的墊圈，讓墊圈起密封作用。

進口真空球閥參數： 

  閥門漏率：Valve Leak Rate 　≤1.3×10-4Pa.L/S.

　適用溫度：Applicable Temperature 　-30～+150℃

　-30～+150℃(PPL密封)

　適用范圍：Appy Range

　連接型式　Loose Flange 　使用壓力范圍(Pa)

　活套法蘭(GB6070、JB919) 　0.6×106～1.3×10-4

　焊接法蘭(GB6070、JB919) 　1.6×106～1.3×10-4

　快卸法蘭(GB4982) 　0.1×106～1.3×10-4

　螺紋連接　Threaded Connection 　1.6×106～1.3×10-4

Threaded connection can be divided into the following categories:

This is a simple connection method, commonly used in small valve. Was divided into two cases:

1) Direct Seal: internal and external thread directly from the seal. To ensure that the connection does not leak, often with lead oil, hemp and Teflon tape filled; which Teflon tape, has become increasingly widespread use; this material good corrosion resistance, sealing effect pole good, easy to use and preservation, demolition, you can completely remove it, because it is a layer of non-tacky film, hemp oil is much superior to the lead line.

2) Indirect Seal: Thread tighten force transmitted to the gasket between two planes, so that the gasket from sealing.

Imported vacuum valve parameters:

??Valve leak rate: Valve Leak Rate ≤1.3 × 10-4Pa.L / S.

Temperature: Applicable Temperature -30 ~ + 150 ℃

-30 ~ + 150 ℃ (PPL sealed)

Scope: Appy Range

Type of connection Loose Flange pressure range (Pa)

Looper flange (GB6070, JB919) 0.6 × 106 ~ 1.3 × 10-4

Welding flange (GB6070, JB919) 1.6 × 106 ~ 1.3 × 10-4

Quick release flange (GB4982) 0.1 × 106 ~ 1.3 × 10-4

Threaded Threaded Connection 1.6 × 106 ~ 1.3 × 10-4

進口真空球閥特點：

1、可在高真空狀態下使用，也可在低壓的系統下使用，達到正負壓同用的優點。

2、不僅結構簡單、密封性好、而且安裝尺寸小，驅動力矩小，操作簡單，易實現快速啟閉

Imported vacuum valve features:

1, can be used in a high vacuum, may also be used in low-pressure system to achieve the advantages with the use of positive and negative pressure.

2, is not only simple structure, good sealing, and the installation of small size, small drive torque, simple operation, easy open and close fast

  德國ORSEN奧爾申進口真空球閥以獨特的設計特點、精湛的制造工藝和近乎完美的運行可靠性已在全世界60多個國家和地區贏得了市場與聲譽。產品質量通過了德國燃?xì)馀c供水工程聯合會、SVTW瑞士燃?xì)馀c供水工程聯合會、KIJH奧地利燃?xì)馀c供水工程聯合會、LIKJ德國技術檢測委員會、Lloyd’s等。Germany ORSEN Orr Shen imported vacuum valve with unique design features, superb workmanship and near-perfect reliability has earned a reputation in the world market with more than 60 countries and regions. Product quality by the German Gas and Water Works Association, SVTW Swiss Gas and Water Works Association, KIJH Austrian Federation of gas and water supply projects, LIKJ German detect Committee, Lloyd's and so on. For information, please access imported vacuum valve (http://www.bj-valve.net) the URL. For the price of imported vacuum valve, please call (Contact: Wang Shuo 010-57165677 Fax: 010-89292114) the call.